JRW Power Generation is dedicated to providing clients with cost-effective services by using knowledge, skill and attention to detail to ensure every project meets and exceeds all power generation standards.  The following is a list of projects that have been completed:

  • Keyera

Rail loading, diluent pump stations, e-house design KFS and ADT modifications for Fort Saskatchewan, design 10 MW power generation system, solar gas turbines.

  • Access Midstream, Dilly, Texas

Acid gas injection plant- design electrical systems for this specialized installation.  Developed design standards to support acquisition by Schneider Electric

  • Phase 1 ESSO Kearl Oilsands project,   

Replaced Lead Electrical for HTT hydro transport and tailings (man hour budget 120,000 hrs)

Issued over 100 single lines (120,000 HP connected load), issued over 900 documents IFC, manage and Lead a team of 45 engineers and designers.
Oversee design and engineering of 21 e-houses, detailed design, QA assurance, implementation of PDS modeling, SPEL
Issued all documents on time, maintained high level of quality.
Support development of site wide standards for all area schematics, single lines, review design of e-houses, switchgear, Mcc’s, ups, etc
Develop module Electrical design criteria for fabrication of 220 modules to be fabricated in Korea and Edmonton.
Provide design and documents to purchase 100mw generator.
Work as Deputy PDL for project design and staff requirements (approx. 100 engineers and designers)

  •  Petro Canada, FT Hills OPP (Ore preparation plant), Ft McMurray

Fel 3 thru detail design of 70 Mw power distributions.
Full engineering design of 35Kv and 5Kv distribution systems, large e-houses,
Large conveyor power systems (2-12,000 Hp), (9-3500Hp slurry pumps)

  • Albian Sands, Coarse Tailings Project, Ft. McMurray

Design two large electrical power houses and pump houses for construction. Work closely with field contractors for construction.
Mobile units complete with 10 MVA transformers, 5kv MCC’s, 3000hp VFD’s, 600v MCC’s, 10Kva ups, RTU’s, Heat tracing systems, fire protection, HSE code compliance, etc
Provide construction support for start up September 2006

  • State Commission for Oil Projects, IRAQ

Single line design, power studies, develop single line drawings for a 500MM oil treating plant
Size power generation equipment, switchgear, MCC’s

  • Canadian Natural, Kirby Central Field

Wellpads Development for DBM  Single lines from P&id’s, Medium voltage VFD power system design, Plot Plan development, Area Classification, EPS design, direct 3D model design, equipment list, incorporate specifications and standards, data sheets, HSE code conformance, fire protection, manage budget.

  • ConocoPhillips, Surmont 2, FEL3 development for SAGD expansion

Develop single lines, Power studies, Equipment lists, Plot plans, area classification. Data sheets, specifications, HSE code conformance
Direct 3D Model design, Manage budget, schedule, cad design

  • Interpipeline, Orion LACT, receives product from Shell Black Rock

Detailed engineering design for construction, Single lines, Plot plan, area classification, Equipment lists, data sheets, 3D model, manage budget and schedule, specifications, HSE code, fire protection

  • Encana, Borealis – FEED study for SAGD extension to Christina Lake

Develop Power system single lines, Site plan development, area classification

  • KN Energy

Senior Electrical Engineer for gas compression and treating facilities in New Mexico, Wyoming, Colorado

  • APEX, NEVADA, Senior Power Engineer

Lead Engineer for 2X2X1 combine cycle 575 Mw cogeneration plant, EPC project
Develop conceptual through detail design for a cogen facility utilizing 2- GE F7A gas turbines, 2-vogt heat recovery systems, 1-steam turbine

  • STILLWATER Mine, Montana

Senior Project Engineer for world’s 3rd largest under ground platinum mine, EPC project.  Responsible for all aspects of Electrical design, Single lines, system studies, site plans, power layouts, transmission, substations

  • GKO-SARGENT & LUNDY ENGINEERING – EL DORADO ENERGY PROJECT – LAS VEGAS, NEVADA

Startup Electrical Engineer responsible for providing engineering review of drawing packages and construction progress for the commissioning of Westinghouse 501F turbines. Combined cycle with proprietary Westinghouse 185 MW steam turbine systems.  500kv gas insulated bus substation.

  • WASCANA ENERGY, Calgary AB – HAY RIVER PROJECT

Senior Electrical Engineer responsible for developing single lines for  on-site power generation

  • WASCANA ENERGY, Calgary AB – EVALUATION OF 45Mw COGENERATION GAS TURBINE

Senior Electrical Engineer responsible for the review and evaluation of GE Stewart Stevenson LM6000 gas turbine.  Made recommendations on power system design for unit purchase.

  • ALBCHEM RESOURCES: 150,000 AMP DC POWER SUPPLY

Provided Senior Electrical Engineering peer review, evaluated system installation, developed system checkout and start-up procedures

  • ALBERTA ENERGY CORPORATION, Calgary AB

Lead Electrical Engineer on SAGD Heavy Oil Process Plant ($200 million).  Provided design of Electrical system Single lines, 138Kv transmission line; modular construction of power plant for remote Northern Alberta site. 

  • BEARSTOOTH PIPELINE MONTANA AMOCO – DENVER, COLORADO

Project Senior Electrical Designer for pipeline extension including single line drawings and classification, Power layout drawings, schematics short circuit and fault calculations.  This pipeline extension required extensive interface with to other petroleum companies and incorporating their electrical systems

  • KN ENERGY, COMPRESSOR STATION – RAWLINGS, WYOMING

Existing substation redesign including evaluation of short circuit calculations, development of substation design to minimize compressor station turn around time
Substation layout drawings (138kv), elevation drawings, bus bar arrangements, single line drawings

  • PACIFIC PIPELINE – BAKERSFIELD TO LOS ANGELES

Project Engineer for an electrical package #2 consisting of several pumping stations, power layouts; area classifications, single line lighting and grounding schematics, installation details, total plant detail design.

  • PUNTA DEL COBRE – CHILE (SX-EW COPPER)

Complete design and start-up of 30,000 A, DC power supply for Solvent extraction of copper

  • YANACOCHA, PERU (GOLD MINE)

Newmont design site preliminary single line and conceptual power generation system for total plant power 25 MW

  •  SEVERONIKEL, RUSSIA (SX-EW COPPER)

Preliminary system design, estimate engineering and construction costs.  Designed single lines, substation layout and design (172kv), plant layouts.  Provided contract engineers, designers, AutoCAD operators, Russian translators, construction resident engineers

  • NASA MISSION CONTROL – HOUSTON

Provided review of emergency power generation system – 10 generators at 1.5 MVA each.  UPS systems of 20 MVA.  Provided coordination study of total emergency power system

  • KNIGHT PIESOLD – INDEPENDENCE MINING – JERRITT CANYON

Design power system to relocate existing 69kv substation and plant motor feeders.  Provided design, drawings, and specifications.  Provide detailed outage logistics

  •  BATEMAN ENGINEERS – NEWMONT GOLD (ROTP) – CARLIN, NEVADA

Provided peer review and constructability evaluation.  Provided contract engineers for site construction

  • LG&E WESTMORELAND – VIRGINIA

Consultant for Stone & Webster
Evaluate 45MW power system and issue report

  • SOUTHERN PACIFIC RAILROAD – LOCOMOTIVE REBUILD FACILITY – DENVER

Provided design services and CAD for redraw and redesign of 1000+ schematic drawings for locomotive engines.  Provided CAD station, CAD operator

  • WOODWARD CLYDE – MOUNTAINTOP, PA (TELEMENTRY & POWER DESIGN)

Produced detail design of power and controls for several wells main plant control system design.  Single lines, schematics, specifications

  • GEOWEST ENVIRONMENTAL – WILLISTON REFINERY

Designed power distribution, instrumentation, schematics, P&ID’s ground water treatment system

  • PUBLIC SERVICE COMPANY OF COLORADO

Substation design, modifications to transformers, bus bar arrangements, switchgear additions. Extensive modification of existing substations La Salle, Ault, Express, etc (138kV to 69kV)

  • Morrison Knudsen Environmental, Denver CO   Manager of E & I 
  • KIMBALL THERMAL OXIDIZATION UNIT

Lead Electrical Engineer responsible for the design, procurement and construction planning project for a 40 million BTU/hr fluidized bed hazardous waste incineration facility. Facility includes solid and liquid waste storage and feed systems, off gas treatment, wastewater treatment, truck warming/sampling/wash, and plant utilities.

  • ROCKY MOUNTAIN ARSENAL – SUPERFUND SITE

Lead Electrical Engineer supporting risk assessment activities.  Designed and constructed a variety of interim remediation measures including source removal from waste pits, groundwater extraction and treatment systems, as well as a bio-remediation pilot study

  • CERCLA Wastewater Plant

Developed Pilot Plant for, ‘Enhanced Soil Extraction Process’

  • FAY ENGINEERING CORPORATION – DENVER, COLORADO

Senior Forensic Electrical Engineer qualified to provide expert testimony in courts of law Forensic evaluation and testing of switchgear and power distribution equipment was conducted in a research laboratory. Evaluation of the failure was then quantified and detailed in report form.  Analysis and review of the failure was then provided at trial.

  • STEARNS CATALYTIC WORLD CORPORATION – DENVER, COLORADO

Senior Electrical Engineer involved in several EPC projects in the lead capacity involving nuclear power plants, oil refineries, gas plants, power cogeneration systems, compressor stations, and water treatment plants

  • COMMONWEALTH EDISON DRESDEN AND LASASLE NUCLEAR STATIONS, CHICAGO IL

Senior Electrical Engineer involved in the design and construction of modification for Commonwealth Edison Company, Illinois.  Development and design of existing class IE emergency power systems in accordance to 10 CFR 50.  Addition of hydrogen water chemistry control system to extend Boiling Water Reactor Plant Life

  • ILLINOIS POWER COMPANY - AUTOMATION OF FREEBURG AND TILDEN COMPRESSOR STATIONS

Lead Electrical Engineer who provided engineering supervision and construction to replace existing S-Rmatic control panels with GE 6000 PLC-logic, interface stations with a Motorola SCADA microwave link prepared final engineering and site commissioning.  Project was valued at $30 million

  •  EXXON LABARGE GAS PROCESSING PLANT, GREEN RIVER, WYOMING

Lead Electrical Engineer who provided engineering supervision and construction for a large processing plant (160 MV load).  Total plant responsibility for 230kv substations, design through construction; transmission lines; 3.5 MW solar gas turbine generators, 15KV vacuum switchgear, 4-11,000 HP compressors, SCADA system (Bailey) distributed control systems.  Developed start-up and check-out procedures for total  plant electrical engineering.  Project valued at $850 million

  •  SUNCOR OIL REFINERY, Ft McMurray AB

Project Electrical Engineer responsible for conversion of existing pneumatic control systems to Honeywell TDC 2000 electronic control (10,700 control loops) and prepared final engineering, construction and commissioning.  Project valued at $30 million.

  • SHELL DEEP CUT ETHANE EXTRACTION PLANT, Calgary AB

Lead Commissioning Engineer responsible for inspection of electrical installation, coordination of electrical check-out, directed electrical start-up and commissioning of new plant.  Project included high voltage motors in excess of 11,000 HP, UPS (Uninterruptible Power Supply), process re-start systems, Allen Bradley programmable logic controllers, and Fisher Provox distributed control systems.  Project valued at $60 million.

  •  MODERNIZATION OF SHELL JUMPING POUND GAS PLANT, Calgary AB

Lead Electrical Engineer responsible for design through to construction, gas plant rehabilitation, troubleshooting, commissioning, and start-up. Project experience included 3000 kilowatt emergency generator systems.  Control room relocation, new sulphur plant, high voltage distribution systems, system coordination studies, modification of utility boiler feed water system.  Project valued at $40 million

 Expert testimony on over 100 electrical forensic cases such as:

  •      Electrical shock

  •      barefoot tourists stepped on energized metal plate

  •      Shop owner has face injury when electric panel explodes

  •      Utility company has environmental contamination due to transformer

  •      Electrical contractor stores old electrical equipment leaking PCB's

  •      Lightning strike hits radio transmitter on mountain top

  •      11,000 horsepower motor fails on compressor

  •       Dentist claims damage to dental equipment due to lightning

  •       Restaurant worker shocked by large food disposal unit

  •       Roofer electrocuted working near electrical substation

  •       Electrician electrocuted working on 5KV switchgear

  •       TV Reporter shocked raising portable antenna into powerlines

  •       Lightning strike damages radio tower in New Mexico desert

  •       Fire Investigation large residence work with arson team for origin and cause​


Whatever your need, i've got the experience

Accurate Estimates

My experience enables me to quickly and accurately assess your power generation, forensic or electrical design needs.